{"product_id":"c4-fabrication-1224-32000-mh","title":"Tacoma Overland Front Bumper \/ 4th Gen \/ 2024+","description":"\u003cp\u003eTacoma Overland Front Bumper \/ 4th Gen \/ 2024+ | Mid-Height Bull Bar w\/ Tube Gussets | Raw - Unfinished\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cp\u003eRequires cutting of the plastic bumper to install.\u003c\/p\u003e\n\u003cp\u003eFits most winches 8k-12k in size. Electrical control box must be relocated from top of winch and trimming\/fitting will be required (Warn VR series is a confirmed fit).\u003c\/p\u003e\n\u003cp\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003c\/p\u003e\n\u003cp\u003eCutouts in front of bumper allow winch lever access.\u003c\/p\u003e\n\u003cp\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8, Heretic Studio 30\" and Rigid SR-30 light bars.\u003c\/p\u003e\n\u003cp\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003c\/p\u003e\n\u003cp\u003eBumper is made from 3\/16″ laser cut P\u0026amp;amp;O steel.\u003c\/p\u003e\n\u003cp\u003eTubing for bull bars is all 1 3\/4\" OD, 1\/8\" wall thickness except for gussets and headlight hoops which are 1 1\/2\" OD.\u003c\/p\u003e\n\u003cp\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003c\/p\u003e\n\u003cp\u003e114 lbs without bull bar, 121 lbs with low-height bull bar, 128 lbs with mid-height bull bar with tube gussets, 138 lbs with full height bull bar and headlight hoops.\u003c\/p\u003e\n\u003cp\u003eAll bull bar variants are compatible with Toyota Safety Sense and parking sensors. Be aware that some vehicles will randomly require a professional TSS system recalibration after bumper install.\u003c\/p\u003e\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003cp\u003eIncludes Washer Tank Skid and winch controller relocation kit.\u003c\/p\u003e\n\u003cp\u003eTRD Pro and TRD Off-Road models do not require additional mini-skid panel.\u003c\/p\u003e\n\u003cp\u003eThis product ships Ground.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n  \u003cli\u003eRequires cutting of the plastic bumper to install.\u003c\/li\u003e\n  \u003cli\u003eFits most winches 8k-12k in size. Electrical control box must be relocated from top of winch and trimming\/fitting will be required (Warn VR series is a confirmed fit).\u003c\/li\u003e\n  \u003cli\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003c\/li\u003e\n  \u003cli\u003eCutouts in front of bumper allow winch lever access.\u003c\/li\u003e\n  \u003cli\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8, Heretic Studio 30\" and Rigid SR-30 light bars.\u003c\/li\u003e\n  \u003cli\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003c\/li\u003e\n  \u003cli\u003eBumper is made from 3\/16″ laser cut P\u0026amp;amp;O steel.\u003c\/li\u003e\n  \u003cli\u003eTubing for bull bars is all 1 3\/4\" OD, 1\/8\" wall thickness except for gussets and headlight hoops which are 1 1\/2\" OD.\u003c\/li\u003e\n  \u003cli\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n  \u003cli\u003e114 lbs without bull bar, 121 lbs with low-height bull bar, 128 lbs with mid-height bull bar with tube gussets, 138 lbs with full height bull bar and headlight hoops.\u003c\/li\u003e\n  \u003cli\u003eAll bull bar variants are compatible with Toyota Safety Sense and parking sensors. Be aware that some vehicles will randomly require a professional TSS system recalibration after bumper install.\u003c\/li\u003e\n  \u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n  \u003cli\u003eIncludes Washer Tank Skid and winch controller relocation kit.\u003c\/li\u003e\n  \u003cli\u003eTRD Pro and TRD Off-Road models do not require additional mini-skid panel.\u003c\/li\u003e\n  \u003cli\u003eThis product ships Ground.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":46110128177340,"sku":"1224-32000-MH","price":2079.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/american-fusion-wheels.myshopify.com\/es\/products\/c4-fabrication-1224-32000-mh","provider":"American Fusion Wheels","version":"1.0","type":"link"}